//******************************************************************************
//Software License Agreement                                         
//                                                                    
//The software supplied herewith by Microchip Technology             
//Incorporated (the "Company") is intended and supplied to you, the  
//Company’s customer, for use solely and exclusively on Microchip    
//products. The software is owned by the Company and/or its supplier,
//and is protected under applicable copyright laws. All rights are   
//reserved. Any use in violation of the foregoing restrictions may   
//subject the user to criminal sanctions under applicable laws, as   
//well as to civil liability for the breach of the terms and         
//conditions of this license.                                        
//                                                                    
//THIS SOFTWARE IS PROVIDED IN AN "AS IS" CONDITION. NO WARRANTIES,  
//WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED  
//TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A       
//PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,  
//IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR         
//CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.       
// *******************************************************************
// PIC18F45K20 Starter Kit Lesson 2 - Blink LED
//
// This lesson blinks LED 7 on the demo board by using a delay and 
// loop.
//
// *******************************************************************
// *    See included documentation for Lesson instructions           *
// *******************************************************************

/** C O N F I G U R A T I O N   B I T S ******************************/

#pragma config FOSC = INTIO67, FCMEN = OFF, IESO = OFF                       // CONFIG1H
#pragma config PWRT = OFF, BOREN = SBORDIS, BORV = 30                        // CONFIG2L
#pragma config WDTEN = OFF, WDTPS = 32768                                    // CONFIG2H
#pragma config MCLRE = OFF, LPT1OSC = OFF, PBADEN = ON, CCP2MX = PORTC       // CONFIG3H
#pragma config STVREN = ON, LVP = OFF, XINST = OFF							      // CONFIG4L
#pragma config CP0 = OFF, CP1 = OFF, CP2 = OFF, CP3 = OFF                   // CONFIG5L
#pragma config CPB = OFF, CPD = OFF                                         // CONFIG5H
#pragma config WRT0 = OFF, WRT1 = OFF, WRT2 = OFF, WRT3 = OFF                // CONFIG6L
#pragma config WRTB = OFF, WRTC = OFF, WRTD = OFF                            // CONFIG6H
#pragma config EBTR0 = OFF, EBTR1 = OFF, EBTR2 = OFF, EBTR3 = OFF           // CONFIG7L
#pragma config EBTRB = OFF                                                  // CONFIG7H


/** I N C L U D E S **************************************************/
#include "02 Blink LED.h"
#include "p18f45k20.h"
//#include <delays.h>   // should work - it compiles, but there is a cpmpiler flag that shows up
#include "c:\\Program Files (x86)\Microchip\xc8\v1.30\include\plib\delays.h" //win 7.8 path
#include "c:\\Program Files\Microchip\xc8\v1.30\include\plib\delays.h"  // win xp path

/** D E C L A R A T I O N S *******************************************/


void main (void)
{

	TRISD = 0b01111110; 	// PORTD bit 7 to output (0) ; bits 6:0 are inputs (1)
        PORTD = 0b01111111;   //  set up led 0 to be opposite of led 7

	while (1)
	{
		LATDbits.LATD7 = ~LATDbits.LATD7; // toggle LATD
                LATDbits.LATD0 = ~LATDbits.LATD0;
		Delay1KTCYx(25);	// Delay 50 x 1000 = 50,000 cycles; 200ms @ 1MHz
	}
	
}