//******************************************************************************
//Software License Agreement                                         
//                                                                    
//The software supplied herewith by Microchip Technology             
//Incorporated (the "Company") is intended and supplied to you, the  
//Company’s customer, for use solely and exclusively on Microchip    
//products. The software is owned by the Company and/or its supplier,
//and is protected under applicable copyright laws. All rights are   
//reserved. Any use in violation of the foregoing restrictions may   
//subject the user to criminal sanctions under applicable laws, as   
//well as to civil liability for the breach of the terms and         
//conditions of this license.                                        
//                                                                    
//THIS SOFTWARE IS PROVIDED IN AN "AS IS" CONDITION. NO WARRANTIES,  
//WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED  
//TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A       
//PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,  
//IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR         
//CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.       
// *******************************************************************
// PIC18F46K20 Starter Kit Lesson 1 - Hello LED
//
// This lesson turns on LED 7 on the demo board.
//
// *******************************************************************
// *    See included documentation for Lesson instructions           *
// *******************************************************************

/** C O N F I G U R A T I O N   B I T S ******************************/

#pragma config FOSC = INTIO67
#pragma config WDTEN = OFF, LVP = OFF, MCLRE = OFF


/** I N C L U D E S **************************************************/
#include "p18f45k20.h"


/** D E C L A R A T I O N S ******************************************/


void main (void)
{

	TRISD = 0b01111111; 	// PORTD bit 7 to output (0); bits 6:0 are inputs (1)

	LATDbits.LATD7 = 1;		// Set LAT register bit 7 to turn on LED

	while (1)
	;
	
}